testing Touchsensitive Faderknobs

[Pearl]

Hi there ...

Is there an easy way to proof if faderknobs are touchsensitive or not?

I bought some touchsensitive knobs from an official distributor but they don't work on my lc-clone. If I test my faders without these knobs then touchsensitive detection is ok.

And now I don't know if they sold me the wrong type or do I have to change something  anywhere.

Bye Pearl

[doc]

There is an easy way to test the knobs:

Just take your Multimeter and measure the resitance on e.g. both ends of the knob. You must measure 0 Ohm.

If the test is ok you have to check if the knobs fit well on the faders. Also you can measure from the touchfader pin on the fader to the knob (with knob fitted on the fader, of course). You also should get (nearly) 0 Ohm for this Test.

Hope this helps

DOC

[Pearl]

Hi ...

I can't measure any value of resistance so I think it's an isolator and they really send me the wrong type.

Thanx and Bye

Pearl