Jump to content

No display and weird sounds from MIDIBOX SID v1


dott.benway

Recommended Posts

Hi all,

I'm trying to resurrect a old MIDIBOX SID that I have built for an eurorack modular synth project.

My setup is composed by the following:

1 16x2 LCD display GDM1602B Xiamen ocular

1 mbhp core  made by smashTV  running PIC18F452 BSL V1.2B MIOS V1.9E

1 SID board made by smashTV ,  8580 is installed

the application is setup_8580_without_cs.hex

In past the system was working perfectly but the cable connections where unstable, so I have decided to rewire It.

After the rewiring I have double checked all the connections but the system doesn't work anymore.

I have also checked all the voltages .

the synthoms are the following:

1) the display is blank (no messages, only a solid rectangle at the system boot)

2) after the system boot the SID is generating a loop of 4 notes like an "alarm tone"

3) Sending a Query in MIOS studio stops  the "alarm tone" with the following message:

Operating System: MIOS8
Board: MBHP_CORE or similar
Core Family: PIC18F
Application is up & running

4) Sending notes in MIOS studio results only in audible "CLICKS"


Have you any suggestions about?

Any hint would be very appreciated.

Thanks,

B.R.

Giorgio.

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...