How to modify pcb in eagle?

[chromdildo]

Hello there.

I want to change the size/shape/drill of the pads/vias in the board layouts (download) section of ucapps.de (*.brd for eagle).

But it drives me cracy!

Is there a solution to alter these pads without changing them in the library?

I like eagle very much, because this is IMO the best pcb-layouter found for linux.

Thanks.

./chrom

[Guest eightlanemusic]

Hey Crom,

seems to be no problem to change only the hole and via´s.

The button for changing parts is right under the- add parts button. A scroll down menu appears and than you choose package from it. With the next click on layout symbol you can change to whatever you want.

excuse me bad english...

[chromdildo]

Thanks for the reply.

But not exactly the thing i'm searching for.

example:

already placed and routed a DIL40 (IC) with the long-octagone-drills.

Now: I want to change just a few of these shapes to smaller ones, to reroute a signal very close to them....

How can this be done? I got no idea.

Thanks again

./chrom

[chriss]

i would change the library. its fast and save.

if you change a package which is already used and you add the changed package to the board, eagle recognice that you have a new package and is updating the board, very handy.

If you just need the package once i would definetly build a new package with copy and paste.

My experiences

chriss

[chromdildo]

Thanks.

Will try on my next layout.

./chrom