Guest arjanver Posted June 23, 2004 Report Share Posted June 23, 2004 Hi,I've build 4 core's and 4 sid's, before i wiring it all together, i want to test 1 core with 1 sid, to make sure it's working.But how to test?All voltages are ok.I've connected a simple speaker to the sid.What exactly load into the core pic?, i've downloaded midibox_sid_v1_6.zipthere are lots of *.syx files:main.syxsetup_6581_slave1.syx"""and so on.First i've loaded the bootloader, and then main.syxThe lcd says mios v1.6..............What to load/do next?Thanks Quote Link to comment Share on other sites More sharing options...
TK. Posted June 24, 2004 Report Share Posted June 24, 2004 Hi,just follow the instructions under http://www.ucapps.de/midibox_sid_csB.html("Preparation of PIC18F cores")Don't forget to update to MIOS V1.7 (thats only possible with the first level bootstrap loader during the first 2 seconds after power-on)Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Guest arjanver Posted June 24, 2004 Report Share Posted June 24, 2004 Hi,Sorry, I must read over it some how ???Is it neccesary to connect a ampifier or sould i hear sound when i connect a little 8ohm speker?Thanks Quote Link to comment Share on other sites More sharing options...
Milkmansound Posted June 24, 2004 Report Share Posted June 24, 2004 You should be able to power a little speaker just fine - my Sid blows my head off with headphones plugged directly into it - Tim Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.