Jump to content

LCD black blocks


bill

Recommended Posts

Hello, i've just finished to build my core module, as my lcd cable, and my next step is to upload the mios on it...

I got a 16*2 lcd, and i can see 1 row filled with black blocks, (not the 2 rows, only the bottom one)

did i build my lcd cable the wrong way or is it normal to have only 1 row filled with black blocks ?

Then, i tried to upload the mios 1.7, thanks to the website procedure, (with midiOX), but i failed... in fact i

the core continue to send the same hexa string, every 2 seconds (i think it's restarting) do i need to power off the board to upload if i failed doing it without the first 2 seconds ?

Thanks for your help !

Link to comment
Share on other sites

Hi,

I've had the same problem during the debugging phase of my mono-SID.

I unfortunately don't remember for sure what was the cause but I think it was due to a short on some lines of the DIN that was connected to my Core or more precisely some of the interface lines between the DIN and the Core.

Good luck...

Lall

Link to comment
Share on other sites

ok, right now, it's working fine, i've uploaded the mios and the sid app without any problem, in fact it was a problem with my soundcard midi out :/

thanks anyway, my 6581 do it's first beep's ;)

next step : the control surface ! yeah !

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...