mandingo Posted December 6, 2004 Posted December 6, 2004 So I got my Sequencer basically put together. It seemed to upload the firmware without any errors. The lcds display thing ok. The problem I am having is all of the leds are flickering and none of the digital ins seem to work right. I check for shorts and the DOUT voltage seems fine. I'm just not sure where to go from here. Any help would be greatly appreciated.Thank you.
TK. Posted December 8, 2004 Posted December 8, 2004 Hi Mandingo,it seems that you have the same problem like some other people before, either the SCLK or the RCLK line has a short. Some useful tips, how to debug this, can be found here:http://www.midibox.org/cgi-bin/yabb/YaBB.cgi?board=troubleshooting;action=display;num=1101405166http://www.midibox.org/cgi-bin/yabb/YaBB.cgi?board=troubleshooting;action=display;num=1096139044;start=15#28(and in a lot of other postings, but to be honest: it's hard to find them again :-/)Best Regards, Thorsten.
mandingo Posted January 12, 2005 Author Posted January 12, 2005 Thank you for the help. I found a cold solder that was causing the problem. :)
TK. Posted January 13, 2005 Posted January 13, 2005 great to read that it is working now after so long time! :)Best Regards, Thorsten.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now