Jump to content

Recommended Posts

Posted

So I got my Sequencer basically put together.  It seemed to upload the firmware without any errors.  The lcds display thing ok.  The problem I am having is all of the leds are flickering and none of the digital ins seem to work right.  I check for shorts and the DOUT voltage seems fine.  I'm just not sure where to go from here.  

Any help would be greatly appreciated.

Thank you.

Posted

Hi Mandingo,

it seems that you have the same problem like some other people before, either the SCLK or the RCLK line has a short.

Some useful tips, how to debug this, can be found here:

http://www.midibox.org/cgi-bin/yabb/YaBB.cgi?board=troubleshooting;action=display;num=1101405166

http://www.midibox.org/cgi-bin/yabb/YaBB.cgi?board=troubleshooting;action=display;num=1096139044;start=15#28

(and in a lot of other postings, but to be honest: it's hard to find them again :-/)

Best Regards, Thorsten.

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...