which kind of buttons?

[moxi]

hello ,i 've found an old stock with some buttons but some are "momentary push button " , other are " toggle switch" and other "push on - push off switch" .

i've some 3 positions toglle switch too , can i use all of them together ,how to tell to mios how react buttons?

i' ve some 100k pots ,can i use them ,instead of 10 k pots?

[illogik]

Hi, for (most of the) buttons used in MIOS applications you need momentary pushbuttons wich are "normally open" (=NO); the switch will only be closed when you push it. Push on/push of can be used for power switch.

Keep the 3 position switch for other projects (lp/bp/hp switch on a nice diy vcf for instance :))

as for the pots; a few posts down you can find this;

http://www.midibox.org/cgi-bin/yabb/YaBB.cgi?board=parts_q;action=display;num=1103305075

good luck, marcel

[moxi]

"normaly open" :that's means i must have 0 volt when the button is pressed and released or just when the button is pushed?

[goyousalukis]

Normally open means that the pins on the button aren't connected together until you push the button.