Guest Serum Posted January 12, 2003 Report Share Posted January 12, 2003 Wondering if it would be possible to use rotary encoders with ledbars instead of motorfaders in LC emulation? Quote Link to comment Share on other sites More sharing options...
TK. Posted January 12, 2003 Report Share Posted January 12, 2003 Yes! :)Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Guest Serum Posted January 15, 2003 Report Share Posted January 15, 2003 btw can more than 8 leds be used per ledbar? =) Quote Link to comment Share on other sites More sharing options...
TK. Posted January 16, 2003 Report Share Posted January 16, 2003 Yes, it's already possible to connect up to 16 LEDs for each ring/bar. The patterns are free definable (see http://www.ucapps.de/midibox/mk_syx.zip , the midibox16e.ini sample file). The LC emulation will offer the same features (and a little bit more ;-))Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Dimitris_FX_freak Posted January 18, 2003 Report Share Posted January 18, 2003 Another fine idea from SerumQuestion By adding 16 encoders for volume and 16 for the usuall parameters is it possible to have the code so the final midibox will be recognised from Logic as Logic contron + extention (meaning 16 channels in one box no master volume)? (i assume I need 2 cores for this project) Quote Link to comment Share on other sites More sharing options...
TK. Posted January 18, 2003 Report Share Posted January 18, 2003 Unfortunately this is not supported by the MC/LC protocol. Every device requires a seperate MIDI In/Out :-(Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.