robinfawell Posted April 25, 2005 Report Share Posted April 25, 2005 Dear ThorstenI have have been successful in obtaining the correct Dout/LED behaviour for the Radio Groups. Thanks again!Analog InputsI have 8 pots and no need to multiplex. Each of the pots is associated with Midi messages (Control Changes) 7 pots are effectively volume controls for the Radio groups No 8 is the tremelo Rate.BX YZ vv is the format where X = 0 1 or 2; YZ is 07 08 or 09 and vv is the pot value. For the tremelo YZ is 01Any change in the pot value will send the relevant CC to the Sound Module.I also need to send the relevant Radio group CC and for Channels 0 and1, the Tremelo CC to the Sound Module at the end of each of the Radio Group Sysex message stored in Banksticks. I have read the example with 64 pots, 128 buttons and LEDS. Question 1. Am I correct in assuming that I can work with 7 bit AIN values and that the 10 bit values are for the LCD BCD characters? In other words can I dispense with MIOS_AIN_PinGet and use only MIOS_AIN_Pin7Get?Regards Robin Quote Link to comment Share on other sites More sharing options...
TK. Posted April 25, 2005 Report Share Posted April 25, 2005 Hi Robin,yes, thats correct - MIOS_AIN_Pin7Get returns the same pot value converted to 7bitBest Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.