tonylight Posted September 2, 2005 Report Share Posted September 2, 2005 hi all, un saluto a tuttiI'm antonio from italy I'm new in this forum :-)I've some question for a project with the midi box 64 or 64E ( what is the difference?)I want build a midi controller for my prefered synt.I have 5 midi ch with different cc.So in total I have 19 pot. 12 sw. and 12 ledBut midi ch 1 and ch 2 have the same cc, so I want 4 pot. zone, with the 1 zone is possible send cc on ch 1 or ch 2 or togheter, is this possible? for this solution is best the 63E ?thanks tony Quote Link to comment Share on other sites More sharing options...
pay_c Posted September 3, 2005 Report Share Posted September 3, 2005 *IF* I understood you:Yes it´s possible. You can set up every single pot with it´s own CC Nr and Midi Channel (and so on... much more). The MB64 works with pots, the MB64E with Encoders and Pots.For further stuff please consider the UCApps Page first. Both things are stated there (beside much more).Greets! Quote Link to comment Share on other sites More sharing options...
tonylight Posted September 3, 2005 Author Report Share Posted September 3, 2005 hi pay_cthanks for replayI've read some more info on midi box so I've decide to do a midi box 64efor have 19 encoder12 switch12 ledI need 2 dinx4 and 2 dout4 is correct.Zone 1 works for midi ch 1 and 2 using the same encoder and switch, for cange midi ch only for this zone, I need another sw? ok I can assig multiple midi ch on each enc and sw?Maybe is better have a sw for edit one ch at time, but this sw, for cange the midi ch assignment of all enc and sw of zone 1, is assigned at what comand?thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.