janvanvolt Posted October 7, 2005 Report Share Posted October 7, 2005 Hi, have some issues with my 2nd CORE + PIC.The CORE is working fine when i use the PIC 18F from the first core (e.g. the LCD display boot up and all is working).If i am using the other PIC, i just get a "short" black line on the display upon booting then nothing; however the reacting to SysEx & reprogramming via Midi works (e.g. i see that with the LCD test application).How can i see if the PIC is really defect or is there some possiblity to reprogram with _without_ a JDM (it's ordered but not yet arrived). ???greetsjan Quote Link to comment Share on other sites More sharing options...
moebius Posted October 7, 2005 Report Share Posted October 7, 2005 reprogramming via Midi works (e.g. i see that with the LCD test application).*What* do you see? And how (or by who) was the 2nd pic programmed? Is it possible it was programmed in Low Voltage Mode?Bye, Moebius Quote Link to comment Share on other sites More sharing options...
janvanvolt Posted October 7, 2005 Author Report Share Posted October 7, 2005 >> *What* do you see? With the LCD test application: nothing, just the MIDI output (on my Midibox).When using the "programming" (e.g. 3 sec turnup) i see the bytes + ACKs from MIDI and from CORE.The only thing i don't see is anything on the LCD. If i use the other PIC in the SAME box with the SAME lcd, the "problem" is gone.>> And how (or by who) was the 2nd pic programmed?Both PICS were programmed by Mike with the default values (0x0000000000) and the bootloader.i will have my JDM next week Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.