Jump to content

janvanvolt

Members
  • Posts

    140
  • Joined

  • Last visited

Everything posted by janvanvolt

  1. As title says, i am parting my MBHP CORE Module without the LPC17 ( i didn't finished assembly, and i cant find the LPC). But you have as a starting point Not sure what to ask for, so parts wise i say 50 EUR and it's yours (plus 4 EUR shipping) Photos are attached.
  2. Hello! I am selling my assembled MIDIBOX SEQ V4 with - STM32 Core - 4 MIDI OUT - Ethernet Module - SD Card Module I'm asking 500 EUR for the assembled unit. Shipping is included (in germany)
  3. I am selling my (rarely used) sammichSID, equipped with SIDs ( i assume 8580, but will check when i am back home ) Furthermore i give a one year warranty on solderpoints and/or parts. EXCEPT the SIDs! The price is 399,-€ without shipping. Shipping +PP in Germany is around 10 EUR, Europewide 20 EUR and worldwide 25 EUR. Feel free to contact me if you have any questions or if you want to see more pictures. - - - Sequioa Parts from Fibra (his original design): Photos here: http://www.flickr.com/photos/fibra/sets/72157604801549403/ Asking 40 EUR plus shipping.
  4. Got any order number or supplier ? I assume you didn't made a PCB ... breadboarded ?
  5. Hi, i'd like to part my fully working and built Midibox SEQ V4lite, as i am not using it much and it's just not fitting my sequencer interests, however it's fun playing with it. Details: - fully built control board - includes LPC Core - Orange Casing with white inlay Costs are: 15 EUR for LPC CORE PCB 30 EUR for the LPC CORE Module (including the programmer part) 10 EUR for the MIDIBOX SEQ V4L 20 EUR for the LPC parts 20 EUR for the SEQ V4L PARTS including SD 25 EUR for the translucent case 120 EUR including shipping in Germany or 120 EUR plus shipping outside germany (approx. 8 EUR). IBAN/BIC would be ideal, otherwise +2.5% PP fees. Cheers Jan p.s.: Permission has been granted by TK, see other thread.
  6. Hi, i'd like to sell my MIDIbox SEQ V4 Lite (with Orange top and bottom Panel) as i am rarely using it. TK, can you approve it ? And what's a fair price for it ?
  7. Hi, selling my fully assembled Dual SSM2044 VCF from T. Stoeckl. Equipped with SSM2044. Set with Styroflex and high quality Pots. Asking: 70 EUR ( because of high costs part count). Price negotiable.
  8. Hi, Due to unforseen private issues, i need to part this lovely built unit and kindly ask for Sale Request. It's a complete functional MB808 with a "MIDIBOX" sticker on Top of it.
  9. And sold! Thanks for the deal. Shipping information provided. Will ship out tomorrow.
  10. For Sale is my lovely MB6582 with blue LED's, green/yellow display, black enclosure. Additionally to the "usual" MB6582, this has ( as far i remember, a 6580 / 6582 combo setup) and of course wooden endcheeks. Will be sold with Commodore 64 PSU. Built quality is very good. (1- as i am not a good debugger, but everything works good) Asking 700 EUR plus Shipping; Have TK's approval for sale! Photo: More photos (some build photos as well) in the Flickr! Set: http://www.flickr.com/photos/jczmok/sets/72157602858452147/with/2214363928/
  11. debugging my f... blofeld system restore

    1. jojjelito

      jojjelito

      Waldorf = support hell still?

  12. Okay, stupid question (maybe): - i finished building the control surface, the wirings and the LPC core. How can i verify if the wirings and everything is correct ? (i'll have the sdcard adapter in the next days, so then stuff is probably easier). any chance thru mios studio ? thx jan
  13. TK: Thanks for the notes. I have a "wonky" USB jack, which does seem to behave strangely (e.g. causing a short) when the cable is put in a certain way. My issue was that in the middle of the upload the power got lost, so i had a "crashed" application. I read thru the docs and J27 is helpful, as it stays in the MiosBoot mode, so i was able to re-upload the code. What i am wondering is that i can't access the LPC via the link module ( given the above error) when it's reconnected via a female adapter, it just drops those errors out. But now it's fine with MIOS studio and application (seems) running; need to finish the V4l board first.
  14. Solution: Put J27 in. Then MIOS Bootloader will stay active. Upload new code, then remove jumper, reconnect usb. should work then :-)
  15. Hi, i successfully separated both halves after uploading the bootloader. Then i was trying to upload the sequencer software (v4l) with the mios application. During the upload i had a "USB power too much draw" issue (seems a "not good" cable), however after changing the cable i still can't upload. with the LPC-Link i get "target marked as not debuggable". Can you shed some light on how i get the unit to a working state ? Programmer says: "Ed:02: Failed on connect: Ep(01). Target marked as not debuggable. Et: Emu(0): Connected. Was: None. DpID: EDB6. Info: T1S6RGRIA"
  16. Call me stupid, but i have a STM32 core here and bought a AOUT_NG. Do i need a AOUT_NG for CV/GATE or not ? And if yes, how shall that be connected ( STM32 <-> AOUT_NG) ? And .. is the 25 PIN SUB-D within the layout of the 8xCinch to DB25 Adapters ( like on many audio stuff, and ES-1 from expert sleepers ) ? Thanks for kind answers jan
  17. Dear Community, i am parting some modules as i don't have a use for them at the moment. Those are either fully assembled, or 95% assembled with minor parts missing. You may ask why you are selling it: clear answer - i just love soldering, but i am not using it because i have too much equipment. Thereof i pass those on to those you are interested in it and use it more than more... I am located in germany, and will ship everywhere. Also i accept paypal - however i prefer IBAN/BIC Bank Payments as they're cheaper for everyone. For sale is : - Gate Control for LPG2c / remote 3-pol on-off-on switch ( from fonitronik ) - asking 10 EUR - 2 x DIY990 ( JE-990 ) assembled - asking 15 EUR each - 1 x TREX2 - asking 20 EUR - USB octomod incl. Teensy-USB - asking 30 EUR - Dual SSM2044 VCF (T.Stoeckl) incl 2 x SSM2044 - asking 60 EUR - SSM2164 Quad VCA with SSM2164 assembled - asking 25 EUR - PSU Delay for Modular synthesizers, with relay - asking 12 EUR - j.haible trapezoid PCB, mostly assembled - asking 45 EUR First come, first serve ...
  18. As i'm cleaning up my desk from unused stuff, here's the stuff up for grabs: - VFD202 2x20 5mm Dot Charakter VFD Module ==> 15 EUR - Valvo JAN5672 ==> 5 EUR - PCB connectors, 1x40 Pins, 80 pcs of connectors => 3 EUR - Sequioa Sequencer Project (Panels + Laser cut Buttons) => 15 EUR - 110 x RC4558 => asking 12 EUR (or sub-rates of it...) - 20 x LM13600 => asking 20 eUR (or 1 EUR each) - 8 x XLR Jacks, Plastic, Female, (for mounting on case) => asking 5 EUR - 2 x Triad TY-304P (600:600 ohms) => 2 EUR/pcs - 2 x Parallax #27800 2 Axis Joystick (parallax.com, search for 27800) => asking 2 EUR/each - PGA 2500 3 PCB assembled Kit (High quality Mic Amp) => asking 199 EUR - highly liquid MPA-100k => asking 20 EUR - anyware VCF PCB + unscreened panel => asking 15 EUR - MOTM Catgirl Synth, SUBOSC Panel => asking 10 EUR Photos are available on request.
  19. I'm also still interested in one window for my MB-6582...
  20. Hi, do we have an update on the Cases ? I really like to enclose (and use) my Sequencer outside the studio. If this is still delayed, are they chances we can get a enclosure directly ? (or do you have a sample one available)? Cheers Jan
×
×
  • Create New...