55mm Slider for sale

[selfservice]

i have about 130 of these

it's 2x50k A (stereo) sliders, good and very precise movement, is good for both pcb or  wire soldering.

i sell this 2€ each.

[drin]

Hi Stefano. Do you have a part number and maybe a manufacturer for the fader?

Thanks!

-drin

[selfservice]

on the case is written:

50KA x 2

6236

near the frist line there is two symbol, a triangle with the marked edges and a circle with an "A" inside.

that's all.

[Synapsys]

Hi,

Another thing you should watch here is the label 50KA. If the pots are relatively new the A could mean audio taper. If the pots are old the A could mean linear. The best thing to do is place the slider in the middle of its travel and measure the resistance between the tap and each end with a meter. The value will be relatively equal if the pot is linear taper but will be noticably different if its audio taper.

Hope this is useful...

Regards,

Synapsys