Cyril Posted February 21, 2003 Report Share Posted February 21, 2003 Hi all!My pots are mounted on a stripboard. Now I want to connect them to the AIN module but I am wondering if I need to connect them in a specific order. has to be the first pot (A0) connected first to J7 (Vs;Vd) and so on?A0 = first connected to J7A1 = second connected to J7...Or can I connect them to J7 like I want? Quote Link to comment Share on other sites More sharing options...
TK. Posted February 21, 2003 Report Share Posted February 21, 2003 So long as you don't use the MIDIbox with a display, the order doesn't matter, since the pots are free assignable. A changed order could also be irritating when you plan to use Serge's MIDIbox editor for the configuration of MIDI eventsBest Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Cyril Posted February 22, 2003 Author Report Share Posted February 22, 2003 Thanks!My midibox has a display and Serge's Midibox editor is a must...so I'll take care of the order ;)Best regards Quote Link to comment Share on other sites More sharing options...
Steven_C Posted July 16, 2005 Report Share Posted July 16, 2005 I have swapped from the old MB 16F firmware to MIOS 1.8. Now my pots are in the wrong order compared to the display! What is the best way to re-assign my pots? (if this is not possible within MIOS, then I'll just disassemble the header sockets on the PCB... I'ts not hard... just time consuming but that's ok!)all the best, from Steve Quote Link to comment Share on other sites More sharing options...
TK. Posted July 17, 2005 Report Share Posted July 17, 2005 Hi Steve,it's possible to map physical inputs to the pin numbers which are used by the software, it requires a small modification within the USER_AIN_NotifyChange function. I don't remember the pot order of the old MB64 hardware, maybe just only one bit needs to be toggled - could you please tell me the order of the first 8 pots?Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
tgp Posted July 20, 2005 Report Share Posted July 20, 2005 So long as you don't use the MIDIbox with a display, the order doesn't matter, since the pots are free assignable. A changed order could also be irritating when you plan to use Serge's MIDIbox editor for the configuration of MIDI eventsBest Regards, Thorsten.and how would you arrange if graphic displays were used?thanks.taylor Quote Link to comment Share on other sites More sharing options...
Steven_C Posted July 31, 2005 Report Share Posted July 31, 2005 tgp wrote...and how would you arrange if graphic displays were used?Did you follow this diagram for the order of your pots? http://www.ucapps.de/mbhp/mbhp_ainx4.pdf because if you did, you shouldn't have any problems, as far as I can see.Thorsten, here is the old order of pots...pot-0 to pin-12 (of 4051)pot-1 to pin-13pot-2 to pin-14pot-3 to pin-15pot-4 to pin-1pot-5 to pin-2pot-6 to pin-4pot-7 to pin-5thanks, from Steve (P.S. if it turns out to be a hassle, don't worry, the old 16F firmware works fine for what I want to do, I just felt like seeing the new features of the MIOS version!) Quote Link to comment Share on other sites More sharing options...
TK. Posted July 31, 2005 Report Share Posted July 31, 2005 Hi Steve,so far I can see, the order is just reversed: OLD NEW0: 12 51: 13 42: 14 23: 15 14: 1 155: 2 146: 4 137: 5 12thats an easy change, just add following lines below the USER_AIN_NotifyChange label in main.asm:USER_AIN_NotifyChange ;; reverse order of pin numbers in MIOS_PARAMETER1[2..0] movlw b'00000111' xorwf MIOS_PARAMETER1, F[/code](hope it works)Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Steven_C Posted August 1, 2005 Report Share Posted August 1, 2005 8) cool, I'll try it! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.