VilladonEnt Posted March 16, 2006 Report Share Posted March 16, 2006 Hello all,I just received some alps encoders with 24 detent and I'm figuring out how to get them connected.Here is what I did so far:1. Modified the mios_tables.inc > ENC_PIN_TABLE > set encoders 1-16 to MIOS_ENC_MODE_DETENTED22. Modified the setup_midibox64.asm > ENC_PIN_TABLE > set encoders 1-16 to MIOS_ENC_MODE_DETENTED23. Rebuilt the Application (No errors)4. Uploaded the main.hex and then the setup_midibox64.HEX using MIOS Studio.5. MIOS RebootedI tried connecting 1 encoder diffrent ways but it seems that when i turn the encoder it jumps from values 0 to 127 nothing in between.I also tried setting the encoders to MIOS_ENC_MODE_DETENTED but same prob.Thanks for your time :)villadon Quote Link to comment Share on other sites More sharing options...
pay_c Posted March 17, 2006 Report Share Posted March 17, 2006 Good news: Your enc most probably works out very well!Most possible: Did you ever look up what´s your controller parameters? I guess it´s sending "Increment/Decrement" messages. If you want it sending 0-127 values in a row, you have to set it to "absolute" behaviour under Enc mode.Greetz! Quote Link to comment Share on other sites More sharing options...
VilladonEnt Posted March 17, 2006 Author Report Share Posted March 17, 2006 Thanks pay c !I'll have to check that feature when I get home from work.That is done in the midibox_64e menu settings correct? Villadon Quote Link to comment Share on other sites More sharing options...
pay_c Posted March 17, 2006 Report Share Posted March 17, 2006 Yepp, you can directly do that on the box.Greets! Quote Link to comment Share on other sites More sharing options...
VilladonEnt Posted March 17, 2006 Author Report Share Posted March 17, 2006 Thanks again, Villadon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.