FiddlerMD Posted May 30, 2006 Report Share Posted May 30, 2006 I am doing a midibox64 implementation and want to connect a few encoders .. I am using the ones SmashTV sells on his site. By default when I connect them to DIN, they send sorta random messages.. basically cause of the nature of the encoder, it sends both pins at the same time for every turn ... i tried editing the tables file .. i am also using smashtv's version of the DIN module so all the pinouts as they appear in the wikis and such don't really apply (but are close enough). Am i correct in understanding that if I have 2 encoders connected to chip #2 on the only din i have going in then it should read like this: ENC_ENTRY 2, 6, MIOS_ENC_MODE_DETENTED ENC_ENTRY 2, 4, MIOS_ENC_MODE_DETENTEDthe rest of them are EOT entries.. as I play with these, i get various results (sometimes what the encoder sends is garbage on all channels).I have also tried midibox_lc and 64e all with the same results... for those who know which encoder it is i'm using, i'm connecting the middle pin to ground and the outside pins to the the various din pins.thanks! Quote Link to comment Share on other sites More sharing options...
FiddlerMD Posted May 30, 2006 Author Report Share Posted May 30, 2006 I just saw smashtv's post about his encoders and just to clarify, i did try detented2 - now i get nothing at all ... i'm really confused here ??? Quote Link to comment Share on other sites More sharing options...
illogik Posted May 30, 2006 Report Share Posted May 30, 2006 don't use mb64 but mb64e ??? ENC_ENTRY 2, 6, MIOS_ENC_MODE_DETENTED ENC_ENTRY 2, 4, MIOS_ENC_MODE_DETENTEDwhy backwards? (not saying this is a problem), and now you have 2 encoders on one side of the SR yeah, you can do 4 per SR.cheers, marcel Quote Link to comment Share on other sites More sharing options...
FiddlerMD Posted May 30, 2006 Author Report Share Posted May 30, 2006 I tried it in correct order also .. and for now i only need 2 encoders anyway... so far i've tried every config and i get 1 of 3 resultsresult 1: nothing at all when i spin themresult 2: signals both directiosn on either turn (functioning as a button i guess)result 3: signals just about every channel there is on every click .. i get like 40 midi events on every clickany ideas? Quote Link to comment Share on other sites More sharing options...
TK. Posted June 3, 2006 Report Share Posted June 3, 2006 Did you try this with the midibox64e application?Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Sasha Posted June 5, 2006 Report Share Posted June 5, 2006 I am using MB64E and my encoders also acts like buttons. I too need only 2 encoders for NI Traktor jogs. Quote Link to comment Share on other sites More sharing options...
FiddlerMD Posted June 5, 2006 Author Report Share Posted June 5, 2006 Did you try this with the midibox64e application?Best Regards, Thorsten.I tried MB64, 64E and LC - none of them could get my encoderes to workcan someone post the EXACT steps invovled to getting 1 encoder working completely in either 64 or 64E (including any necessary code changes and pin-for-pin soldering using 1 encoder like the type sold by SmastTV ) ?? Quote Link to comment Share on other sites More sharing options...
tatapoum Posted June 5, 2006 Report Share Posted June 5, 2006 Both SmashTV and Voti encoders specifications are here :http://www.midibox.org/forum/index.php?topic=3980.0Hope it helps,ludo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.