MIDIbox of the Week (MIDIbox SEQ of MTE)

[TK.]

This nice MIDIbox SEQ has been tinkered by MTE :)

He wrote (in german)

nach knapp 1 Monat Arbeit möchte ich hier meinen "Seq-U-Lizer" vorstellen. :)

Er ist noch nicht ganz fertig, ich warte noch auf meine AOUT-Bauteile. Die Frontplatte habe ich selber

gebohrt und mit Folie nassgeklebt. Ihr vermisst sicher die 16 Step-Buttons, die sind in den Encodern

integriert. Im nachhinein fiel mir beim Forum-Stöbern aber auf, daß das evtl. keine so gute Idee war, wegen

dem Handling....aber ich werds sehen :)

Ansonsten hat es echt Spaß gemacht das Ding zu zimmern und ich kann es gar nicht erwarten damit zu

rocken !! :)

Danke TK für Deine tollen Projekte !

[tos]

I like the layout & it has that industrial-look.

Just....too much wasted surface on front pannel (in the corners).

Lovely toy!!

[MTE]

Its hand-drilled....sawed wood ;D

But thnx

Greetz MTE

[sonicwarrior]

I like this datawheel knob.

Would you tell us the source for this? :)

[MTE]

Its from an cannibalized Videorecorder....called ALPS "Jog Shuttle" :)

Datasheet : http://www3.alps.co.jp/WebObjects/catalog.woa/PDF/E/Switch/Encoder/SRGP/SRGP.PDF

Regards

MTE

ahh i found an Topic about this...enjoy --> http://www.midibox.org/forum/index.php?topic=3852.0

[sonicwarrior]

Thanks for the answer.

I did a bit of research and found something similar on the german ALBS homepage:

http://www.albs.de/dreh1.htm

Part number is: JSK5542-88

Here is a picture:

As far as I understand this suits only on the Jog-Shuttle SRGP not on

normal encoders.

[tos]

Everything can be "adjusted". Example, attached.

This is a some old fader handle from some old radio which has a opening on the bottom side but it is

way to small to fit a handle of radiohm fader. Key answer thermal shrink hose, it is beautiful, and not to mention that it acts like a spring, absorbing fast fader attacks. All that it needs is a piece of metal in the middle of both handles and perfect. Offcourse, this was just the test, it works but I'll probably still be using "real" fader caps as soon as I get my hands on 3-5 of those.

[MTE]

As far as I understand this suits only on the Jog-Shuttle SRGP not on

normal encoders.

Right :(