Why do i get Midiout Flood?

[mF_freak]

Hi,

I burned the Bootstrap1.1b loader, uploaded mios 1.1, everything was fine and  the LCD too.  But  anytime i am trying to upload Logic emulation 1.1.2 or houston emu, Midiox receives billions of Midi-out flood from the core. Why is that? Maybe iam using just the LCD and the core? Is it neccesary to build everything first to get rid of that midi-out flood?  I saw a msg about the crystal etc. , but i have a pic18f452 and a 10mhz crystal, so it doesnt have to be the problem. Well my Midiox (input & output screen) after uploading logic emu looks like this:

00007179   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

0000717A   1  --     CE    06    --   15  ---  PC: Harpsichord  

0000717A   1  --     E0    00    00    1  ---  Pitch Bend  

00007530   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

00007531   1  --     CE    08    --   15  ---  PC: Celesta      

00007531   1  --     E0    00    00    1  ---  Pitch Bend  

000078E7   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

000078E8   1  --     CE    0E    --   15  ---  PC: Tubular Bells      

000078E8   1  --     E0    00    00    1  ---  Pitch Bend  

00007C9E   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

00007C9F   1  --     CE    30    --   15  ---  PC: String Ens 1  

00007C9F   1  --     E0    00    00    1  ---  Pitch Bend  

00008055   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

00008056   1  --     CE    36    --   15  ---  PC: Synth Voice  

00008056   1  --     E0    00    00    1  ---  Pitch Bend  

0000840C   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

0000840D   1  --     CE    38    --   15  ---  PC: Trumpet      

0000840D   1  --     E0    00    00    1  ---  Pitch Bend  

000087C3   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

000087C4   1  --     CE    3E    --   15  ---  PC: SynthBrass 1  

000087C4   1  --     E0    00    00    1  ---  Pitch Bend  

00008B7A   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

00008B7B   1  --     C0    00    --    1  ---  PC: Acc. Grand Piano  

00008B7B   1  --     E0    00    00    1  ---  Pitch Bend  

00008F31   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

00008F31   1  --     C6    00    --    7  ---  PC: Acc. Grand Piano  

00008F32   1  --     E0    00    00    1  ---  Pitch Bend  

000092E8   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

000092E8   1  --     C8    00    --    9  ---  PC: Acc. Grand Piano  

000092E9   1  --     E0    00    00    1  ---  Pitch Bend  

0000969F   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

0000969F   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

000096A0   1  --     E0    00    00    1  ---  Pitch Bend  

00009A56   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

00009A57   1  --     E0    00    00    1  ---  Pitch Bend  

00009E0D   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

00009E0D   1  --     F6    --    --   --  ---  Tune Request      

00009E0E   1  --     E0    00    00    1  ---  Pitch Bend  

0000A1C4   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

0000A1C4   1  --     F8    --    --   --  ---  Timing Clock      

0000A1C5   1  --     E0    00    00    1  ---  Pitch Bend  

0000A57A   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

0000A57B   1  --     FE    --    --   --  ---  Active Sensing    

0000A57C   1  --     E0    00    00    1  ---  Pitch Bend  

0000A931   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

0000A932   1  --     CE    00    --   15  ---  PC: Acc. Grand Piano  

hope anyone have any suggestions.

thx in advance

::)

[LO]

sounds like its workin!

you may need to connect either pots to the AIN's or earth the input pins. (if you havent already)

:D

[mF_freak]

Thanks for your reply...  ;)

I didn't earth the pins , but i will try to connect them with the ALPS MFs. I hope it will be ok then. Otherwise ill earth them. Problem is i only have one MF now. Can i also connect 7x just normal linear sliders to the MF module?

I wish i would have a detailed schematic about the connections from the MF module to the Motorfaders. Is there any? Because on the motorfaders there are 5 connections, 3 pins on the slider and 2 on the motor itself.

Btw this link is down:

http://www.ucapps.de/mbhp/mbhp_mf_interconnections.pdf

Thanks

Regards

[TK.]

Hi Sly,

I haven't found the time to re-create the diagram (I'm too frustrated that I deleted the file by fault... :-( )

Please: don't connect any fader if you are not sure about the pinning in order to avoid any risk of damage. One simple exchange of two pins could fry the fader -> trashcan

Once I've more time again (2-3 days) I will inform you about the correct wiring. In the meantime you should connect the analog inputs to ground.

Best Regards, Thorsten.

[TK.]

I found it in an old backup :)

http://www.uCApps.de/mbhp/mbhp_mf_interconnections.pdf

Best Regards, Thorsten.