mF_freak Posted April 7, 2003 Report Share Posted April 7, 2003 Hi,I burned the Bootstrap1.1b loader, uploaded mios 1.1, everything was fine and the LCD too. But anytime i am trying to upload Logic emulation 1.1.2 or houston emu, Midiox receives billions of Midi-out flood from the core. Why is that? Maybe iam using just the LCD and the core? Is it neccesary to build everything first to get rid of that midi-out flood? I saw a msg about the crystal etc. , but i have a pic18f452 and a 10mhz crystal, so it doesnt have to be the problem. Well my Midiox (input & output screen) after uploading logic emu looks like this:00007179 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 0000717A 1 -- CE 06 -- 15 --- PC: Harpsichord 0000717A 1 -- E0 00 00 1 --- Pitch Bend 00007530 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 00007531 1 -- CE 08 -- 15 --- PC: Celesta 00007531 1 -- E0 00 00 1 --- Pitch Bend 000078E7 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 000078E8 1 -- CE 0E -- 15 --- PC: Tubular Bells 000078E8 1 -- E0 00 00 1 --- Pitch Bend 00007C9E 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 00007C9F 1 -- CE 30 -- 15 --- PC: String Ens 1 00007C9F 1 -- E0 00 00 1 --- Pitch Bend 00008055 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 00008056 1 -- CE 36 -- 15 --- PC: Synth Voice 00008056 1 -- E0 00 00 1 --- Pitch Bend 0000840C 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 0000840D 1 -- CE 38 -- 15 --- PC: Trumpet 0000840D 1 -- E0 00 00 1 --- Pitch Bend 000087C3 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 000087C4 1 -- CE 3E -- 15 --- PC: SynthBrass 1 000087C4 1 -- E0 00 00 1 --- Pitch Bend 00008B7A 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 00008B7B 1 -- C0 00 -- 1 --- PC: Acc. Grand Piano 00008B7B 1 -- E0 00 00 1 --- Pitch Bend 00008F31 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 00008F31 1 -- C6 00 -- 7 --- PC: Acc. Grand Piano 00008F32 1 -- E0 00 00 1 --- Pitch Bend 000092E8 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 000092E8 1 -- C8 00 -- 9 --- PC: Acc. Grand Piano 000092E9 1 -- E0 00 00 1 --- Pitch Bend 0000969F 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 0000969F 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 000096A0 1 -- E0 00 00 1 --- Pitch Bend 00009A56 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 00009A57 1 -- E0 00 00 1 --- Pitch Bend 00009E0D 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 00009E0D 1 -- F6 -- -- -- --- Tune Request 00009E0E 1 -- E0 00 00 1 --- Pitch Bend 0000A1C4 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 0000A1C4 1 -- F8 -- -- -- --- Timing Clock 0000A1C5 1 -- E0 00 00 1 --- Pitch Bend 0000A57A 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 0000A57B 1 -- FE -- -- -- --- Active Sensing 0000A57C 1 -- E0 00 00 1 --- Pitch Bend 0000A931 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano 0000A932 1 -- CE 00 -- 15 --- PC: Acc. Grand Piano hope anyone have any suggestions.thx in advance ::) Quote Link to comment Share on other sites More sharing options...
LO Posted April 7, 2003 Report Share Posted April 7, 2003 sounds like its workin!you may need to connect either pots to the AIN's or earth the input pins. (if you havent already) :D Quote Link to comment Share on other sites More sharing options...
mF_freak Posted April 8, 2003 Author Report Share Posted April 8, 2003 Thanks for your reply... Â ;)I didn't earth the pins , but i will try to connect them with the ALPS MFs. I hope it will be ok then. Otherwise ill earth them. Problem is i only have one MF now. Can i also connect 7x just normal linear sliders to the MF module? I wish i would have a detailed schematic about the connections from the MF module to the Motorfaders. Is there any? Because on the motorfaders there are 5 connections, 3 pins on the slider and 2 on the motor itself.Btw this link is down:http://www.ucapps.de/mbhp/mbhp_mf_interconnections.pdfThanks Regards Quote Link to comment Share on other sites More sharing options...
TK. Posted April 9, 2003 Report Share Posted April 9, 2003 Hi Sly,I haven't found the time to re-create the diagram (I'm too frustrated that I deleted the file by fault... :-( )Please: don't connect any fader if you are not sure about the pinning in order to avoid any risk of damage. One simple exchange of two pins could fry the fader -> trashcanOnce I've more time again (2-3 days) I will inform you about the correct wiring. In the meantime you should connect the analog inputs to ground.Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
TK. Posted April 9, 2003 Report Share Posted April 9, 2003 I found it in an old backup :)http://www.uCApps.de/mbhp/mbhp_mf_interconnections.pdf Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.