pots sends only one value (like button)

[Guest dendy]

core works ok, on start up sends sysex F0 00 00 7E 40 00 01 F7.

pots sends only 1 values when moving...

tested with 1 single pot connected directly to core, unused PIC inputs

connected to ground, 2 versions of mios - configured  for 64 pots

and configured for 1 signle pot (downloaded from download section)

- and the same result... while moving pot, core send only  

one value at the begin of pot's range (works like  button).

sorry for poor english

[LO]

dont you need to conect them thru the AIN module??

[Guest dendy]

when connected thru AIN the result is same for every pot... every pot sends another value but every sends only one at the beginnig of pot range...

[TK.]

Hi Dendy,

it seems that your pots are not connected correctly. Maybe the power lines at the outer pins... check also this schematic:

http://www.ucapps.de/mbhp/mbhp_ainx4_64pots.pdf

Best Regards, Thorsten.