Help!! MIDIbox64 Problem

[Sebo]

Hi:

After a lot of work I finished my MIDIbox64 with 32 pots and 28 buttons.

After solve a lot of wiring problems I get it to work (outside the case).

Now I finished the case and mounted all inside but when I power up

I get this 2 messages "Loading BANK from Bankstick" ... "Formating Bankstick" very quick a lot of times, then MIOS restart, and the same

messages again, but this time the app hungs up after some time.

I disconnected the bankstick, and the same happens, I disconected

everything and no change. I uploaded MIDIbox64 2.4 again and no

luck.

Any Ideas.

Thank you.

except LCD

[Sebo]

Problem Solved !!!!

A not so good solder that brokes when I mounted the PCB in the case.

Thanks

[SLP]

I like this kind of problems  ;D

[ilmenator]

Hi Sebo,

just for the record: which broken solder joint (where in the circuit) caused that specific behavior?

Best regards, ilmenator

[Sebo]

I have a SmashTV Core R4C. The problem was in one of the resistors

under the PIC, I'm not shure right now wich was (the box is closed, and

I don't want to open it again), but I think is was R2.

Hope this help somebody in the future.