fbrabson Posted February 8, 2008 Report Share Posted February 8, 2008 Hi all --I'm testing a few wall warts from my supply and finding that the voltages are reading significantly higher (9V wart is reading 11.8; 4.8v wart is reading 12.8, 3.7v wart is reading 8.7).Can anybody shed light on this? I've hacked off the connector ends so I can test various connections on a screw-down terminal block. Is is possible I took out resistors in the process?Thanks,Freddie Quote Link to comment Share on other sites More sharing options...
nILS Posted February 8, 2008 Report Share Posted February 8, 2008 Voltage drops as current rises - hook up some LEDs or something else to the adapter and voltage will most likely drop to the desired range. Quote Link to comment Share on other sites More sharing options...
fbrabson Posted February 8, 2008 Author Report Share Posted February 8, 2008 Thanks, nILS. Miles to go.... :)Freddie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.