Leaderboard

woo hoo! what's good for the OLED is good for the VFD!

Newhaven OLED NHD-0420DZW-AY5 on MB6582 1.) Connect your Newhaven OLED according to the following Pinout This is represented on the PCB like this: You will have to solder the 4 small SMD Jumper bridges on the bottom of the PCB Reassure that you have all the pins right and then proceed to step 2. 2.) Start MIOS Studio and connect your MB6582 to your Midi Interface Make sure that you have a stable connection - now load the device_id_00_lcd7.hex (supplied by TK from another thread). Start the upload to the MB6582. After this upload has been finished select the MB6582 Firmware application again (setup_mb6582.hex) - the attached file is version 2.045pre1 Wait till the upload is finished. 3.) Enjoy your new OLED awesomeness! device_id_00_lcd7.hex setup_mb6582.hex