niles

Having issue with the SD card - I have Midibox NG v1.036 loaded, it shows up in MIOS Studio. I have an SD card with SEQ_L.NGC inserted but when I try the 'load seq_l' command I get this: If I restart the core and MIOS studio without an SD card it says SD Card Not Found, so I assume it's not the cable? I'll admit the polarity of these IDC cables are giving me confusion for some reason, despite the videos haha. But I think I got that ok. I've tried a bunch of different cards, not sure what to do next. Any idea what I should try next?

Thank you, @Hawkeye! @gotkovsky I know you got it running (awesome) but in case anyone else has a 'not found' issue in MIOS studio, I had the really large USB switch set wrong - the one between OTG and regular USB mode. Once I switched that it showed up fine. On a side note, I definitely appreciate the multiple, smaller PCBs vs one or two huge ones. I did a NAVA build a year ago and that took seemingly forever and was just too unwieldy. Lastly, I was able to load the project.hex file posted from Hawkeye in an earlier post, but is there a newer, official build by TK for this? I have been looking and only found the SVN, no idea how to compile..was hoping the latest firmware binary would just be able to download somewhere obvious. I have a ways to go in this build and can only work a little bit at a time so I'm not too worried right now. However, if there is a seq v4+ firmware version specific to this kit, might be helpful if it's available on the midiphy page. Just a suggestion.

Thank you - I wasn't sure how much of that cable I'd need for this kit and was hesitant to tear it apart.

Still building the first few boards...probably a dumb question but what is the mouser part number for the grey IDC cable that connects the SD pcb to the core? I have the 34wire one (517-3365/34FT) but can't seem to find the smaller size on the BOM or my stash of componets. Looks like I'll need a lot. Thanks!

PM sent, thank you for managing the bulk order!