-
Posts
234 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by Fairlightiii
-
-
Updated price of the DIL RN in the Wiki because we reach 200 units: 0,26 €.
Regards.
-
Sounds reasonable to me, although I would probably put it MB-LRE8x2CS, as the LRE is the more important info compared to the 8x2 "form factor". Also, I think we had the BLM 16x4, for which the number of columns were mentioned before the number of rows.
MB-LRE8x2CS adopted (if anybody see any objection).
Regards.
-
I slightly modified the design of the board.
The revision is now 2.4 and the improvements are:
- Cap C5 positioning near "IN" DIL header.
- Silkscreen improvements.
I've named the board "MB-2X8LRE-CS" trying to respect more or less the Midibox naming.
"MB" stand for Midibox.
"2X8" because 2 rows of 8 columns (maybe one day there will have 2X4 or 1X8 board).
"LRE" stand for LedRings Encoders.
"CS" stand for Control Surface.
I would like to have your feedback about it and waiting your suggestions.
Regards.
-
...Mouser just confirmed the date of the December 5th 2012.
Regards.
-
I think it is OK but how do you get the stock avalaibility date?
Do you phoned them?
It is the date indicated in their site.
Often the date on the site is not sure at all.
Thank you for the information: I sent to Mouser an email to confirm this shipping date and wait their answer.
Regards.
-
Why not leave the bulk order open for one more week, so that PCBs and Mouser items will both arrive close to December 12? Maybe some more people are willing to join :)
...Exact.
New time-frame:
- Bulk order start: October 29th 2012.
- End of the list: November 23th 2012.
- I PM (or email) member with the total amount to pay: November 24th - 26th 2012.
- Payments will be accepted until November 30th.
- I order the PCBs and the Mouser order: December 1st 2012.
- PCBs and Mouser order arrive near the December 12th 2012.
- I ship the PCBs and Mouser components to each member: December 13th - 15th 2012.
I will update the Wikipage if there is no other feedback in the afternoon.
[Edit: Wikipage updated.]
Regards,
Jerome.
- Bulk order start: October 29th 2012.
-
Bad news: Mouser do not stock enough SIL resistor networks.
Mouser estimate to receive the new stocks for the December 5th 2012.
I propose to modify the time-frame accordingly:
- Bulk order start: October 29th 2012.
- End of the list: November 18th 2012.
- I PM (or email) member with the total amount to pay: November 18th - 20th 2012.
- Payments will be accepted until November 25th 2012.
- I order the PCBs and the Mouser order: November 26th 2012.
- PCBs order arrive near the December 5th 2012.
- Mouser order arrive near the December 12th 2012.
- I ship the PCBs and Mouser components to each member: December 13th - 15th 2012.
This time frame may be subject to change due to unforeseeable events.
I'm waiting your feedback about this new time-frame to update the Wikipage.
Regards,
Jerome.
-
To be more precise:
150 units: 8,50€.
200 units: 8,00€.
Regards.
-
what is the price with 500 boards on the order :laugh:
I haven't asked to my manufacturer but unfortunately after 100 units the price drop but not as much as before 100s, and more you order more the drop is decreasing.
Anyway I think that 9€ is a very good price for that sized PCB! We can hope a slightly drop with the reach of 150s but it should be not so important.
Regards.
-
103 units already ordered so the new price is now 9 € each board :thumbsup:
The Wiki page is updated.
Regards.
-
It just makes no sense to buy 98 boards @ 11 € each, if you can buy 100 @ 9€ each :).
100% agree with you, and it won't happen.
If participants pull out at the last moment or for example don't respond to payment requests, I'll be happy to adopt one of their boards. Only in that case though. :thumbsup:
I'm ready to buy 10 (maybe 20) extra boards - at least to reach the 100 units - and I'm confident some members still will join us and won't let pass this bargain!
Regards.
-
Happy Birthday, man!
Thank you LyleHaze.
(I hope this doesn't break the TOS for bulk orders!!)
LyleHaze
...you remind me that I should integrate a clause for my birthday :flowers:
-
I'll Take 4
If you have problems to fill the wiki page, email or PM me.
Regards.
-
If the price drops similarly to how it did for the last pcb I will definitely order one more pcb and make mine 4. (right now that WOULD make it 90, so only ten more would be needed.) Heck, if we get to 99, I'll add one anyway.
...when we will reach 100 units the PCB will drop to 9€.
Regards.
-
Thank you Francois.
We will reach in any case the 100 units, if necessary I would buy a few extra boards for latecomers but I'm confident more members will participate to this bulk order.
Regards.
- 1
-
Un petit dessin pour vous donnez envie...
-
Hi.
The price of the 10k SIL resistor network is now 0,085€ (>500 units).
...Waiting for the 100s PCBs.
Regards.
-
Dear members.
Can you send me by mail (jeromebo at free dot fr) your:
Username
Paypal mail address
Real name
Postal address
Country
Level of shipping insurance you want to take.
Best regards,
Jerome.
-
It will be not exactly hole but "D hole", isn't it?.
...I spoke about the metal hole not the acrylic hole for the shaft.
Regards.
-
It will be not exactly hole but "D hole", isn't it?.
Will you plan to use the same method than the MBseq frame with recess?
Maybe an another method to test would be to make hold the acrylic frame with the nut of the encoder with another nut underneath.
We can imagine a lot of nice things to do but the problem with metal panel is the price.
Regards.
-
-
That, kind sir, is truly le bling! :cheer:
...and I hate bling.
Awesomeness ensues and all will be right with the world as soon as we can get these boards up and running.
Soon.
-
/double post/
Regards.
-
This is a poorly quality video only to see only what you can expect:
Regards.
Control surface PCB for 16 encoders/LEDrings Bulk Order
in Bulk Orders
Posted · Edited by Fairlightiii
Thank you ilmenator for having checked the layout.
The layout pass the Eagle DRC default rules (8mil minimum clearance, 10mil minimum wire width, ...). I do not use extra "risky" tolerance that some manufacturers can handle.
The yellow x-crosses you can see are "zero length airwires", they appear when the intersection of 2 wires of the same signal are not exactly on the same grid (in our case, they are produced near pads but the connection is made effectively inside the pad).
Tim/smashtv already made his observations of this in during the design.
Regards.