Search the Community
Showing results for tags 'windows10'.
Hello all, I noticed that the MIDIBox DokuWiki is a little bit outdated (still based on XP screenshots) and not necessarily easy to understand for true beginners. I have written the small guide here to describe step by step as best as possible the installation and configuration of Eclipse for MIOS32 projects. All comments are welcome of course (and if somebody wants to try to make sure that nothing is missing or is wrong, he/she is welcome ) Benoit (EDIT : due to an update, the first version of the file has been deleted from this message to avoid any mismatch. Please see below for the updated version)
Hi all, I am facing a very, very strange problem with MIOS Studio under Windows 10. I have created an application using Eclipse with MIOS32 on my Win10 machine, but when this application is loaded in the STM32F407 via MIOS Studio, I loose the USB connection between MIOS Studio and the MBHP. I thought first it was my application, but when I upload it with MIOS Studio on a XP machine, the USB connection works Here are the steps I follow : - installation of MIOS Bootloader V1.0.18 on the MBHP using ST LINK - I start MIOS Studio 2.4.6 : the USB MIDI port appears and MIOS Studio displays the bootloader message - I select the HEX file compiled from Eclipse and upload it into the board : application is uploaded correcly. MIOS Studio looses the USB connection when the STM32 restarts (normal behavior up to now) - if I scan now the MIDI devices on the computer : no more MIOS32! I can try anything from disconnecting USB, power supply, etc... It never appears again I then reloaded the bootloader using ST LINK : USB connection to MIOS Studio works again. At this level, I thought it was an error on my side, blocking USB. I connect now the MBHP to a WinXP machine and I take the HEX file compiled on the Win10 machine. The bootloader appears as expected and I am able to upload the HEX file into the MBHP. But now, when the MBHP restarts (with the application compiled on Win10 machine), it works perfectly with MIOS Studio under XP! If I connect it to the Win10 machine again : fail! So the problem is clearly not in my code, nor in the toolchain being run under Win10. Did somebody already saw that? Benoit