interconnection test - pin d7 should be 0 when cs# 0 ?

[matrigs]

like in the topic name - when switching the cs# to 0 should the d7 pin also go to 0 or stay at 5 volts ? the readme doesn't mention that.

[TK.]

D7 should stay at 5V, so it seems to be a short circuit between CS# and D7

Best Regards, Thorsten.

[matrigs]

no no it does what it is supposed to do.

i'm still having alot of trouble with my sid - arp is still down and filter doesn't work like it should too.

interconnection test is fine

testtone works

2 different cores used

both 6581 and 8580 the same problem... wicked