Grounding unused jumpers on AIN?

[jamie3]

The documentation says to ground the unused pins not connected to the AIN module when a 4501 and the pots are missing.

My question is, if the 4501 is connected but no pots are, do the unused pins still need to be grounded?

jamie

[cimo]

yes if pins are enabled on the software

[nILS]

Search for AUAIMBCTG :-)

[cimo]

[jamie3]

Search for AUAIMBCTG :-)

i was looking at the schematic however it stated ground the pins only if you leave out a 4501.

i have 4x4501s mounted onto the PCB, however for testing I am only going to use one of them, hence why i asked if they still need to be grounded.

;)

[cimo]

remember that often sometime it is easier to disable pins on the software

[/tilted/]

God damn, Cimo!! How many languages do you speak??!?!

[cimo]

God damn, Cimo!! How many languages do you speak??!?!

i don t speak Danish, i barely understand it, it s such a difficult language that i doubt Danes really understand it themselves.

[jamie3]

remember that often sometime it is easier to disable pins on the software

ok ill take a look at the code.