ale Posted November 15, 2008 Report Share Posted November 15, 2008 Salve a tutti,sono riuscito a costruire i vari moduli e appena accceso...ready!A parte il led dell'opl3 che nn si accende,su lcd forse ci sono dei problemi...Allego 2 foto dell'lcd in fase di accensione:1 foto appena accendo e la seconda foto dopo qualche secondo...E ora?roba da pazzi!!!Calcolate che mi sono appassionato da circa 1 mese alle varie saldature,circuiti integrati ecc..Magari ho fatto qualche errore.....allego qualche altra foto,magari qualcuno mi sa' dire se ho collegato tutto bene....Ringrazio tutti in anticipo!!!!!!!!!!!IMGP1134.JPGIMGP1135.JPGIMGP1136.JPGIMGP1137.JPGIMGP1134.JPGIMGP1135.JPGIMGP1136.JPGIMGP1137.JPG Quote Link to comment Share on other sites More sharing options...
nILS Posted November 15, 2008 Report Share Posted November 15, 2008 crosspost bad. Quote Link to comment Share on other sites More sharing options...
stryd_one Posted November 15, 2008 Report Share Posted November 15, 2008 Yes. It's OK because you used two languages, but you should note the crosspost for your reference and for others: problem lcd,core-opl3 Quote Link to comment Share on other sites More sharing options...
Smithy Posted November 16, 2008 Report Share Posted November 16, 2008 crosspost bad.note good. :P Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.