boops Posted March 14, 2009 Report Posted March 14, 2009 Hi i find this:It makes sense to add LEDs which show the SID selection. This requires a DOUT module with a single shift register (etch your own, build the circuit on a veroboard, or buy a premade MBHP_DOUTX4 board). As this would only allocate 4 pins, you could add three additional LEDs for the SHIFT/UP/DOWN buttons. The LED next to the SHIFT button will flash on each BPM beat later (not implemented yet), the UP LED shows if the CC function is active, and the DOWN LED shows, if the edit function is active.IMPLANTED? Best regards Quote
boops Posted March 23, 2009 Author Report Posted March 23, 2009 no answer... :( :( OR PERHAPS I CAN WIN THE QUESTION OF THE week!!!regards Quote
seppoman Posted March 23, 2009 Report Posted March 23, 2009 two hints:1. DON'T SHOUT!!! ;)2. rephrase your question - honestly I don't see what you're asking?S Quote
Goblinz Posted March 23, 2009 Report Posted March 23, 2009 Not really sure of the question either.Why would you want the LEDS nex to the SHIFT/UP/DOWN buttons when they aren't related to those functions? Quote
boops Posted March 23, 2009 Author Report Posted March 23, 2009 I HATE THE PANCAKE BUT (don't shout) heu sorry,so ;i have cooked the rabbit!!!! 8) re:TK has wrote in simple surface:The LED next to the SHIFT button will flash on each BPM beat later (not implemented yet)at this day ,is it implanted in the rc 30 for the simple surface, plug to J5 ? Regards Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.