Midibox 64 - DOUT : default LED status

[worker8]

Hi all,

I'd like to know if the LEDs should be bright at start-up ?

Best,

Pierre

[protofuse]

it all depends of your apps.

paste the code

[ssp]

well taken from the title its the default mb64 code, adn whats the default status of the leds without code change.

[protofuse]

adn?

[worker8]

Yes, when I turn my midibox on, all the leds are on (bright). I guess it's not the default setting for a midibox 64. Perhaps I got a hardware problem. I'd like somebody to tell me.

[protofuse]

could you paste your code here...?

[worker8]

Actually I'm using a default ready to upload .hex file.

What file would you like to see ?

[TK.]

Protofuse: he uses the MIDIbox64 firmware...

No, all LEDs should be off.

Are the buttons working?

If no: there seems to be a general problem with the SRIO chain, debugging help here: http://www.midibox.org/dokuwiki/doku.php?id=din_module

If yes: there seems to be a connection problem between CORE:J8 and DOUTX4:J1 - the srio_interconnection test (as described on the DIN module page) helps to debug this as well.

Best Regards, Thorsten.

[protofuse]

TK answered :)

[worker8]

Buttons works fine : after pressing one, the LED is off unless I press the corresponding button.

Thank U, I know what to check now.

Pierre

[TK.]

Ok, thats a different scenario: the core is able to control all LEDs, correct?

In this case the hardware is ok, and it's very likely, that you stored "all-LEDs-on" in the default snapshot.

Turn off all LEDs, and press the snapshot button again (for ca. 3 seconds until the store function is triggered)

Best Regards, Thorsten.

[worker8]

You're right, shame on me.

Thx

Pierre