worker8 Posted October 7, 2009 Report Share Posted October 7, 2009 Hi all,I'd like to know if the LEDs should be bright at start-up ?Best,Pierre Quote Link to comment Share on other sites More sharing options...
protofuse Posted October 8, 2009 Report Share Posted October 8, 2009 it all depends of your apps.paste the code Quote Link to comment Share on other sites More sharing options...
ssp Posted October 8, 2009 Report Share Posted October 8, 2009 well taken from the title its the default mb64 code, adn whats the default status of the leds without code change. Quote Link to comment Share on other sites More sharing options...
protofuse Posted October 8, 2009 Report Share Posted October 8, 2009 adn? Quote Link to comment Share on other sites More sharing options...
worker8 Posted October 8, 2009 Author Report Share Posted October 8, 2009 Yes, when I turn my midibox on, all the leds are on (bright). I guess it's not the default setting for a midibox 64. Perhaps I got a hardware problem. I'd like somebody to tell me. Quote Link to comment Share on other sites More sharing options...
protofuse Posted October 8, 2009 Report Share Posted October 8, 2009 could you paste your code here...? Quote Link to comment Share on other sites More sharing options...
worker8 Posted October 8, 2009 Author Report Share Posted October 8, 2009 Actually I'm using a default ready to upload .hex file.What file would you like to see ? Quote Link to comment Share on other sites More sharing options...
TK. Posted October 8, 2009 Report Share Posted October 8, 2009 Protofuse: he uses the MIDIbox64 firmware...No, all LEDs should be off.Are the buttons working?If no: there seems to be a general problem with the SRIO chain, debugging help here: http://www.midibox.org/dokuwiki/doku.php?id=din_moduleIf yes: there seems to be a connection problem between CORE:J8 and DOUTX4:J1 - the srio_interconnection test (as described on the DIN module page) helps to debug this as well.Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
protofuse Posted October 8, 2009 Report Share Posted October 8, 2009 TK answered :) Quote Link to comment Share on other sites More sharing options...
worker8 Posted October 8, 2009 Author Report Share Posted October 8, 2009 Buttons works fine : after pressing one, the LED is off unless I press the corresponding button.Thank U, I know what to check now.Pierre Quote Link to comment Share on other sites More sharing options...
TK. Posted October 8, 2009 Report Share Posted October 8, 2009 Ok, thats a different scenario: the core is able to control all LEDs, correct?In this case the hardware is ok, and it's very likely, that you stored "all-LEDs-on" in the default snapshot.Turn off all LEDs, and press the snapshot button again (for ca. 3 seconds until the store function is triggered)Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
worker8 Posted October 8, 2009 Author Report Share Posted October 8, 2009 You're right, shame on me.ThxPierre Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.