Invert order of Gates in SEQ and MidiboxCV

[julienvoirin]

Hi *

I've doen CV and gates jackboards (on veroboard) for my SeqV4 and a midibox CV but as i followed the design of the AOUT_NG for the order of CV/Gate (1 on left ... 8 on right, ground in the back) i got a problem with the gates of J5A/B : the order is inverted (logical as the Gnd is on front)! so i'd like to change it in the firmware for SeqV4 and MidiboxCV, but i do not know where searching.

Thanks for your help

[TK.]

It's easier and faster (performance wise) to change this on your hardware.

Best Regards, Thorsten.

[julienvoirin]

i just want to change the define :

J5:A0 as my gate 8

J5:A1 as gate 7

etc ...

Is it possible and in which file ?

[TK.]

No his isn't possible, and as mentioned earlier, it's easier and faster (performance wise) to change this on your hardware.

Best Regards, Thorsten.

[julienvoirin]

:ermm: ok TK thanks for your fast reply