julienvoirin Posted June 13, 2010 Report Share Posted June 13, 2010 Hi * I've doen CV and gates jackboards (on veroboard) for my SeqV4 and a midibox CV but as i followed the design of the AOUT_NG for the order of CV/Gate (1 on left ... 8 on right, ground in the back) i got a problem with the gates of J5A/B : the order is inverted (logical as the Gnd is on front)! so i'd like to change it in the firmware for SeqV4 and MidiboxCV, but i do not know where searching. Thanks for your help Quote Link to comment Share on other sites More sharing options...
TK. Posted June 13, 2010 Report Share Posted June 13, 2010 It's easier and faster (performance wise) to change this on your hardware. Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted June 13, 2010 Author Report Share Posted June 13, 2010 i just want to change the define : J5:A0 as my gate 8 J5:A1 as gate 7 etc ... Is it possible and in which file ? Quote Link to comment Share on other sites More sharing options...
TK. Posted June 13, 2010 Report Share Posted June 13, 2010 No his isn't possible, and as mentioned earlier, it's easier and faster (performance wise) to change this on your hardware. Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted June 13, 2010 Author Report Share Posted June 13, 2010 :ermm: ok TK thanks for your fast reply Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.