sineSurfer Posted July 13, 2010 Report Share Posted July 13, 2010 Hi, looking at mbSEQ v4 pages: "Up to 4 MBHP_IIC_MIDI modules can be added if desired (note: with a simple hack in the IIC firmware even 8 modules could be accessed from the sequencer - infos available on request)." Is there anything special to be made on the hardware side to configure each module address?, the idea would be to build a dedicated pcb with 8 extra midi outs Btw. is it possible to "sequence/save" channel changes on the software side? thanks! Quote Link to comment Share on other sites More sharing options...
Altitude Posted July 13, 2010 Report Share Posted July 13, 2010 I am actually planning on laying out and etching some boards with 4 IIC out channels. Dont know anything about the fore-mentioned hack, but going to 8 would be fairly trivial. Quote Link to comment Share on other sites More sharing options...
TK. Posted July 13, 2010 Report Share Posted July 13, 2010 I described the details somewhere in the forum, but I'm too lazy to use the search function. ;) Changing channels: can be done via CCs CCs can be sequenced. CC Layers are stored in a track. So: yes, it's already possible. Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.