Jump to content

SRIO Demo App


Underskor

Recommended Posts

I put the SRIO Demo app on my MIOS32 board, and whenever I touch a DIN pin (eg. J3:Vs OR J3:D0), I get an APP_DIN_NotifyToggle() 1 through 127. All 127 toggle between 0 and 1 with each touch.

I may have misunderstood the purpose of the SRIO app but it says in the readme.txt:

This application demonstrates the MIOS32_SRIO driver

- DIN pins will be forwarded to DOUT pins

- DIN pins send a MIDI message (Note Events)

- DOUT pins controllable via Note Events

- Encoders at SR 13/14 will send CC events

The APP_DIN_NotifyToggle() functions aren't the note events the readme.txt mentions are they? I interpreted it to mean that each DIN would send an individual note event.

Link to comment
Share on other sites

you've got a short between SCLK and some near trace, maybe RCLK , or ground or 5V. Use "bip bip" mode multimeter and check independancies of the 6 signals (Si So RC SC 5V Gnd)

i already had this problem some years ago

I interpreted it to mean that each DIN would send an individual note event.
True, you are right Edited by julienvoirin
Link to comment
Share on other sites

I just did what you said julienvoirin, this is what I got:

J8:RC>J9:RC - connected

J8:SC>J9:SC - connected

J8:S0>J9:S1 - not connected

J8:Vd>J9:Vd - connected

J8:Vs>J9:Vs - connected

On the DIN board, no J1 pins are connected.

I don't understand what you mean by SCLK and RCLK though sorry, can't seem to find them on the PCB schematic. :pinch:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...