igi Posted April 5, 2011 Report Share Posted April 5, 2011 (edited) Hi! Here is pdf. and Eagle PCB file for MIDIBOX SWINSIDx22 pcb. Pcb can be connect directly to core module, just CS line for second SWIN is outside connector. There is not shematic, just Pcb, but is actually MIDIBOX SID module and SWINSID X2 together on same board. Here is some links for original SWIN shematic and newest firmware, witch is really fantastic!!! Swinkels, thanks again!!!!! http://www.swinkels.tvtom.pl/swinsid/ http://www.forum64.de/wbb3/board65-neue-hardware/board288-sid-co/board294-swinsid/33292-swinsid-firmware-updates/index2.html Sound demos comming soon. !!! There is wrong MCU in shematic!!! ATmega8515 should be used, not ATmega8535!!! IGISWiNX22.pdfSWiNX22.rar Edited August 11, 2011 by igi Quote Link to comment Share on other sites More sharing options...
ilmenator Posted April 5, 2011 Report Share Posted April 5, 2011 Yes, just zip the file(s). Quote Link to comment Share on other sites More sharing options...
igi Posted April 6, 2011 Author Report Share Posted April 6, 2011 Hi! Like I'm from 18th century!!! Thanks, file is attached. IGI Quote Link to comment Share on other sites More sharing options...
bartbral Posted July 18, 2011 Report Share Posted July 18, 2011 hi there.. was reading your post and others about SwinSID... and... insn't it the ATmega8515 you want to have and not the ATmega8535 that's in your schematics? could be i'm wrong... but thought i should ask before ordering the wrong IC's. thanx, Bart Quote Link to comment Share on other sites More sharing options...
igi Posted August 11, 2011 Author Report Share Posted August 11, 2011 Hi there!!! Sorry, but in shematic should be ATmega8515 and not ATmega8535. Thanks Bartbral, my mistake!!! :whistle: Regards IGI Quote Link to comment Share on other sites More sharing options...
sidmonster Posted August 12, 2011 Report Share Posted August 12, 2011 Hi there!!! Sorry, but in shematic should be ATmega8515 and not ATmega8535. Thanks Bartbral, my mistake!!! :whistle: Regards IGI IGI, thanks very much for your upload of the swinsid pcb, I etched on last week. I still need to drill holes and order components for it. Can you tell me where I might find the DAC in USA and perhaps a full parts list in english? Quote Link to comment Share on other sites More sharing options...
Antix Posted August 12, 2011 Report Share Posted August 12, 2011 Crap!!! I already bought 8535...... them will not work anyway? Antix Quote Link to comment Share on other sites More sharing options...
igi Posted August 14, 2011 Author Report Share Posted August 14, 2011 (edited) Hi there!!! I'm really, really sorry, but ATmega8515 and ATmega8535 are not pin compatibile, so you can not use 8535. To Bartbral: I buy DAC on ebay (I don't know from where) IGI Edited August 14, 2011 by igi Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.