After some futzing around I think I successfully loaded the MIOS32
bootloader. I don't have my parts from SmashTV yet so I can't test
it (or can I?) so could someone confirm, the LED blinks three times
and then goes off and then comes on and stays on. Is this what I
should be seeing? Thanks.
LPC1769 - load MIOS32 Bootloader
Started by
johnh
, Feb 12 2012 19:15
5 replies to this topic
#1
johnh
-
- Programmer
-
- 114 posts
MIDIbox Addict
- LocationNorth end of Monterey Bay, California
Posted 12 February 2012 - 19:15
FF 01 1B 54 68 61 6E 6B 73 20 66 6F 72 20 74 68 65 20 4D 49 44 49 62 6F 78 2C 20 54 4B 21
#2
TK.
-
- Administrators
-
- 12,438 posts
MIDIbox Guru
- LocationGermany
Posted 12 February 2012 - 20:17
Yes, your core module is up&running!
Best Regards, Thorsten.
Best Regards, Thorsten.
Buy TK a Beer Disclaimer: buying TK a beer gets you absolutely nothing in return likesuchas firmware enhancements, technical advices and MIDIbox troubleshooting assistance.
#3
johnh
-
- Programmer
-
- 114 posts
MIDIbox Addict
- LocationNorth end of Monterey Bay, California
Posted 12 February 2012 - 22:13
Thanks Tk! Now I'm working to get I've got the board split into two pieces using a 'box-cutter' and multiple passes.
Edited by johnh, 12 February 2012 - 23:49.
FF 01 1B 54 68 61 6E 6B 73 20 66 6F 72 20 74 68 65 20 4D 49 44 49 62 6F 78 2C 20 54 4B 21
#4
matoz
-
- Members
-
- 289 posts
MIDIbox Tweaker
- Location25000 france
Posted 06 March 2012 - 10:46
Hi all,
i can't load mios32 bootloader, when i click on the icon "program flash", there is nothing inside the box.
When i try to open project.bin, computer says it isn't a valid Win32 application.
Any idea?
i can't load mios32 bootloader, when i click on the icon "program flash", there is nothing inside the box.
When i try to open project.bin, computer says it isn't a valid Win32 application.
Any idea?
MBSIDV1, MB6582, ClockBox, MBSEQV3, MBFM, MBSpeakjet, MB64E, MBCV with SSM2044 and more...
In build: the final panel for all this stuff
In build: the final panel for all this stuff
#5
matoz
-
- Members
-
- 289 posts
MIDIbox Tweaker
- Location25000 france
Posted 06 March 2012 - 11:44
Some news, i have the file project.bin into the project window, and when i click on the icon program flash, it says: "project project has no MCU information"
No problem with the file project.hex, i can be opened, but i didn't found yet how to send it into the board.
No problem with the file project.hex, i can be opened, but i didn't found yet how to send it into the board.
Edited by matoz, 06 March 2012 - 11:45.
MBSIDV1, MB6582, ClockBox, MBSEQV3, MBFM, MBSpeakjet, MB64E, MBCV with SSM2044 and more...
In build: the final panel for all this stuff
In build: the final panel for all this stuff
#6
matoz
-
- Members
-
- 289 posts
MIDIbox Tweaker
- Location25000 france
Posted 06 March 2012 - 15:56
yeah!!! it works, the LED blinks three times
and then goes off and then comes on and stays on , i think it is ok.
In File, i selected New, other, selected LPCXpresso C project, select wizzard C project, named it "test", select target selection LPC1769, and select None in CMSIS options, and it create a project on project window at the left, and after that i was be able to click on the icon program flash, i browse the project.bin and click OK, and it has been done.
and then goes off and then comes on and stays on , i think it is ok.
In File, i selected New, other, selected LPCXpresso C project, select wizzard C project, named it "test", select target selection LPC1769, and select None in CMSIS options, and it create a project on project window at the left, and after that i was be able to click on the icon program flash, i browse the project.bin and click OK, and it has been done.
MBSIDV1, MB6582, ClockBox, MBSEQV3, MBFM, MBSpeakjet, MB64E, MBCV with SSM2044 and more...
In build: the final panel for all this stuff
In build: the final panel for all this stuff
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
