Spirit Posted April 13, 2012 Report Share Posted April 13, 2012 Hello again. I have connect 20 Fader to a AINx4 Maby a little strange but it Used pin 13 to 32. But if i slide the fader on pin 32 in Does not Respont. i if slide the fader on pin 31 it react only it Send 2 notes. And to make a Layout from Pin 32 to 13 it look like this. R = Reponding only it sends 2notes N = Not responding N-R-R-N-R-N-N-R - N-R-R-N-R-N-N-R - N-R-R-N As you see its the same Pattern But what did i do Wrong? Kind regards, Emile ballard Quote Link to comment Share on other sites More sharing options...
Janis1279 Posted April 14, 2012 Report Share Posted April 14, 2012 Hi, If you used MB64 setup connection diagramm looks like : http://www.ucapps.de...p/auaimbctg.pdf and asm setup file part looks like: ; Setup File of TK's MIDIbox64 ; ; Number of connected pots ; Allowed values: 1-64 #define DEFAULT_NUMBER_POTS 20 ; number of connected pots ; ; Multiplexers (AINX4 modules) connected? -> set this value to 1 ; No multiplexer connected= -> set this value to 0, allowed number of pots in this case: 1-8 #define DEFAULT_MUX_ENABLED 1 ; enable multiplexers ; Regards, Janis Quote Link to comment Share on other sites More sharing options...
Spirit Posted April 14, 2012 Author Report Share Posted April 14, 2012 Hi thanks for the reply i will look in to it. But i just connect the other AINx4 module and that one just works fine. i also connected the wires this time from 1 to 20. so if i get my pots i will try the other AINx4 module again and see what will happin. Thank anyway, and yes i made a MB64. Kind regards, emile ballard Quote Link to comment Share on other sites More sharing options...
unuldinei Posted May 3, 2012 Report Share Posted May 3, 2012 1 - Check the CORE with 8 unmuxed pots.If it is OK then ... 2 - Check the board AIN4 , it seems is like a defect on it . Quote Link to comment Share on other sites More sharing options...
Spirit Posted May 4, 2012 Author Report Share Posted May 4, 2012 Thats for the extra thinking. but as i sad before the Second AINx4 Module work like a Sharm. but i look a little closer to the other AINx4 module and i Noticed one BIG soldering fault and a Little one. so hopefully that will solve my problem. but first i'm waiting on my Nice Digitast Buttons. then the Pots will come ;-) Thanks for everything, Spirit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.