Switch cap and acrylic panel

[Fairlightiii]

Hi everybody.

First I would like to ask to people that have already experienced the famous couple TL1100F160Q (switch) / C&K PE BK (cap switch) what should be the better aperture size for 3mm acrylic panel with a standard spacer of 10mm? I found differents sizes for differents projects (sammichSID, x0xb0x, Shruthi, ...).

Second question: Did anybody used the medium grey acrylic panel of Formulor.de with (red) LED regarding the tranparency?

Thank you.

Best regards.

Edited September 1, 2012 by Fairlightiii

[jojjelito]

Hi,

Not to nitpick, but the Shruthi and the standard Ambika use the smaller TACBLK and similar caps. NOT the TA12-series or the PE-BK/WHT etc.

Best,

J

[Fairlightiii]

Thanks jojjelito.

It's exact, I didn't realize that before (certainly because I planed to use PE-BK/WHT caps during the casing of my Shruthi)!

Regards.

[Shuriken]

To further nitpick :wink:, that Sammich uses the TA12 series. These are 5,70mm width, the TAC series which are used in the Shruthi are 5,5mm

Edited September 2, 2012 by Shuriken

[Fairlightiii]

NOT the TA12-series or the PE-BK/WHT etc.

Hi jojjelito.

Is TA12 series equivalent of PE-BK/WHT serie (to be used in MBseq)?

Regards.

[jojjelito]

Hi jojjelito.

Is TA12 series equivalent of PE-BK/WHT serie (to be used in MBseq)?

Regards.

Hi J!

Yup they are. If you see different measurements it's because it is tapered:

/__\

and one of them is measured at the base, the other at the top.

Best,

J

[Fairlightiii]

Hi J!

Yup they are. If you see different measurements it's because it is tapered:

/__\

and one of them is measured at the base, the other at the top.

Best,

J

Hi J!

I call that a professional answer :thumbsup:.

Regards.