cosmosuave Posted November 11, 2013 Posted November 11, 2013 Hello... I am looking to source the front panel and the case that go's with the panel as per Wilba's build... I have searched the forum but still not sure on the process in doing so and figure I may get a quick answer this way... I am sorry if this has been asked before... I understand the panels come from Schaeffer Apparatebau and is there a file (mbseq_v3_with_v4_labels.fpd) that I have to send to them for the panel and if so which one? In the past I have made my own but this is far too complicated to do... All the other parts have been ordered just need the case and panel... Thanks... bri
ilmenator Posted November 11, 2013 Posted November 11, 2013 Alternatively, you could go for an acrylic panel lasercut by Ponoko. Way cheaper, but obviously not as sturdy.
cosmosuave Posted November 11, 2013 Author Posted November 11, 2013 (edited) Thanks for the suggestion... I need something sturdy as this will be in and out of the studio ... Edited November 11, 2013 by cosmosuave
jojjelito Posted November 11, 2013 Posted November 11, 2013 The member julianf here has a company: http://www.thebeast.co.uk who can also cut these panels. They're cheaper than Schaeffer (Germany)/FrontPanelExpress (USA). Check them out!
cosmosuave Posted November 12, 2013 Author Posted November 12, 2013 19" black panel ordered from Julian... Thanks again jojjelito..
jojjelito Posted November 12, 2013 Posted November 12, 2013 Glad to be of service! Post some pictures when you get it up and running. :)
cosmosuave Posted November 13, 2013 Author Posted November 13, 2013 Will do... Probably blog this on my web site...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now