set to an encoder, 2 control change

[folly]

I WANT set to an encoder, 2 control change


EXAMPLE; turning left CC = 1; turning to the right CC = 2

how you doing?

thank!

[folly]

there is no one who understands my problem?    :sad: :question:

Edited September 25, 2014 by folly

[TK.]

I understand the problem, but I can't provide a solution (yet)

 

Best Regards, Thorsten.

[folly]

Thak Thorsen!! 

[TK.]

I just remember that there is a solution! :)

-> http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fcontrollers%2Fmidibox_ng_v1%2Fcfg%2Ftests%2Fconev_1.ngc

 

Best Regards, Thorsten.

[folly]

THANK YOU THORSTEN! Then do the tests then tell you how it goes.

 

Regards, Silviu.

[folly]

I run this setup default.ngc and everything works great ..(encoder ALPS 24 pp- detent).  thanks Thorsten.

 

ENC n=  4   sr= 9  pins=6:7   type=detented3


EVENT_ENC  id=4  hw_id=4  enc_mode=Inc01_Dec7F  if_equal=0x01  type=CC cc=96 lcd_pos=1:1:2 label="Enc INC"
EVENT_ENC  id=4  hw_id=4  enc_mode=Inc01_Dec7F  if_equal=0x7f  type=CC cc=97 lcd_pos=1:1:2 label="Enc DEC"

 

Best Regards