Jump to content

LPCXpresso not showing NXPLPC1700 Projects


renegadebliss

Recommended Posts

Hello,

  I am trying to get started with the LPC17 CORE module for my Midibox Seq v4.

 

I am following the instructions that are posted here:

 

http://www.ucapps.de/mbhp_core_lpc17.html

 

 

following the steps for installing the MIOS32 Bootloader

 

I've downloaded the LPCXpresso 5.2.6 and I have installed and registered.

 

It does say this now on the Splash Screen:

LPCXpresso5 is fully activated.

 

The instructions on the above link indicates this:

 

"After the LPCxpresso IDE has been opened, create a new "FreeRTOS project" for LPC1700 controllers.

This project is only used as a dummy to enable the flash programmer - you don't need to change something in the code template, it won't run under MIOS32 anyhow!
(You will transfer a precompiled binary into the flash)"

 

 

 

But when I go to "Create New project" it doesn't show ANY NXP  option.  

 

 

It says this:

Wizard:

 

LPC11/LPC12

LPC13/LPC17/LCP18

LPC2x/LPC3x

LPC4

LPC8xx

 

 

I'm attaching a picture showing the New Project Wizard?

 

 

Is there something I'm, supporsed to Import first?

Should I be selecting New Project?  Is there different steps?

 

 

Thanks!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...