sylwester Posted January 27, 2015 Report Share Posted January 27, 2015 Hello, I have been testing OSC on the LPC17 Core and even with udpmon set to 4, I cannot see any incoming or outgoing messages. What I tried so far: I set network to dhcp set osc_remote 3 192.168.64.252 set osc_local_port 3 8000 set osc_remote_port 3 8000 set osc_mode 3 1 set blm_port OSC3 and start BLM Emulator for OSX. No success. Also no success with Lemur. I can verify that there is no packet filtering in my local network - UDP should pass without any issues. Also what BLM Emulator does: it crashes after a delay of 5s after clicking on the connect button. Quote Link to comment Share on other sites More sharing options...
verpeiler Posted January 27, 2015 Report Share Posted January 27, 2015 No MagJack hence no OSC here, just some ideas... I would check basic ip conectivity at first. Is your core and your OSX at the same ip subnet? If so you could try to ping and/or verify your OSX has an entry in it's arp-cache for your core. You could watch if your OSX receives something from the core with tcpdump. Could you post the output of an ifconfig -an from your OSX and the output of the network command from your core? Quote Link to comment Share on other sites More sharing options...
kpete Posted January 27, 2015 Report Share Posted January 27, 2015 Could the problem be that you are using the same port number of 8000 for your source and destination port? Quote Link to comment Share on other sites More sharing options...
sylwester Posted January 27, 2015 Author Report Share Posted January 27, 2015 I've checked the routing and networking is really not the problem in this case. ICMP packets (ping) does nicely, TCP/IP too. I tried using port 10001 as Local Port and 10000 as Remote Port, but this didn't fix the problem that there is no OSC incoming / outgoing from the LPC17 core. Quote Link to comment Share on other sites More sharing options...
sylwester Posted January 27, 2015 Author Report Share Posted January 27, 2015 Ther interesting thing is now: Lemur connected finally, but still no packets visible. Pressing "Start" on the Virtual BLM also doesn't trigger anything. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.