eptheca Posted February 17, 2015 Report Posted February 17, 2015 the way I am casing my SEQ V4 (STM32F4) there will be a 50 cm. distance between the Core and the MIDI sockets. either I can have the MIDI I/O and Quad IIC boards close to the Core, and 50 cm. cables to the sockets, or I can mount the boards to the back plate, and have 50 cm. cables to the Core. Is it a cable length problem with the MIDI I/O and IIC boards, like it is with the DIN/DOUT/AOUT? It would be a lot easier to just stretch 3 flat ribbon cables from the Core to the boards, than 2-3 wires from each IN/OUT (with 4 IN and 12 OUT, that's 44 wires soldered / crimped on each side :sad: ) Quote
Shuriken Posted February 17, 2015 Report Posted February 17, 2015 I think the 50cm to the midi sockets is not a problem. I have midi cables of 5mtr. Quote
eptheca Posted February 17, 2015 Author Report Posted February 17, 2015 I guess I was a bit unclear my question was really if I can have 50 cm. cables between the Core module and the MIDI I/O and Quad IIC modules Quote
ilmenator Posted February 18, 2015 Report Posted February 18, 2015 Looking at the schematic I see no reason why you shouldn't be able to use a 50cm cable between Core an MIDI I/O module. For the Quad IIC module I don't know for sure, but I would assume it should work. Quote
eptheca Posted February 18, 2015 Author Report Posted February 18, 2015 I guess I will just have to try it when I get there ;) It would make my build better and easier Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.