3.5mm Jack Breakout PCB for AOUT_NG

[Rowan]

I have just received a pair of these PCBs in the post

http://www.cgs.synth.net/modules/cgs93_trunk.html

There absolutely perfect to add 8 x 3.5mm sockets to the AOUT_NG as they have 16 pin headers with a Pinouts that exactly matchs the Pinouts on the AOUT_NG CV output header. It's like they were actually designed for the job.

They cost $10 USD and come with a eurorack panel. All you need to add is the 3.5mm sockets and headers.

With a bit of fudging they could easily be used for gate outputs connected to a DOUT module.

I'm waiting on some 3.5mm sockets arriving in the post and once it's assembled I'll report back.

Edited June 18, 2015 by Rowan

[electrodancer]

oosh nice one...might be very intersted in this

 

keep us posted please

[Rowan]

I'm happy to report that these breakout boards work great, you just need to careful with the pin out when connecting the AOUT and DOUT modules.

Here is my rough and ready test setup.