Altitude Posted October 8, 2015 Report Share Posted October 8, 2015 (edited) I figured they would be useful for someone STMF4 Core cutout. This requires a 2mm washer to go between the threaded terminal (mouser PN 534-7700) and the panel since the discovery board and core board do not sit in the same plane. This also recesses the SD card somewhat but seeing that it does not get removed often, I opted for a small slot for aesthetics instead of a bigger opening to make it easier to get out For the midi cutouts, you want to use SDS-50J midi connectors (http://www.cui.com/product/resource/sds-xxj.pdf) which have holes in them for M2.5 or 2-56 screws. The holes to the right are for activity LEDs stmf4CoreCutouts.fpd 4xIIC.fpd midiIO.fpd Edited February 12, 2016 by Altitude 3 Quote Link to comment Share on other sites More sharing options...
EsotericLabs Posted January 31, 2016 Report Share Posted January 31, 2016 Thank you! Quote Link to comment Share on other sites More sharing options...
arumblack Posted February 12, 2016 Report Share Posted February 12, 2016 Anyway to convert .fpd to .eps files? thanks. Quote Link to comment Share on other sites More sharing options...
Altitude Posted February 12, 2016 Author Report Share Posted February 12, 2016 export it as SVG, open in Illustrator, save as EPS Quote Link to comment Share on other sites More sharing options...
arumblack Posted February 12, 2016 Report Share Posted February 12, 2016 Thank you. i was hoping to avoid installing the software, I have so much installed already and I'm not going to use it otherwise but oh well, no big deal. Quote Link to comment Share on other sites More sharing options...
EsotericLabs Posted February 15, 2016 Report Share Posted February 15, 2016 Here they are in SVG. PanelsInSVG.zip Quote Link to comment Share on other sites More sharing options...
arumblack Posted February 15, 2016 Report Share Posted February 15, 2016 I went a head and installed the FPD software and did it myself, but thanks. I'm sure someone else will find them useful. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.