Jump to content

MBHP_MF_NG no response from Core


lakewood

Recommended Posts

Hey guys!
Im completely new to midibox and mios things but i plan to build a daw controller for my studio!
so i just soldered a MBHP_MF_NG module together and burned the bootloader_v1_2b_pic18f452.hex file via PIC programmer onto my 19F452.
The next step would be to enter MIOS Studio (version 2.4.6) and load the firmware of the board via MIDI.
I connect the module with my MIDI interface (klick) the the IN-LED of the MIDI-interface starts blinking -> i get a signal from the module.
In MIOS Studio i get the error message:

No response from MIOS8 or MIOS32 core!
Check MIDI IN/OUT connections
and Device ID!
For debugging see also
Help->MIDI Troubleshooting


and in the MIDI IN section an endless list of signals appear (everytime the IN-LED of the interface blinks the list updates):

Scanning for MIDI Inputs...
[1] USB Midi
MIDI Monitor ready.
[6104.260] ff
[6104.920] ff
[6106.760] ff
[6109.840] ff
[6111.680] ff
[6112.941] ff
[6114.219] ff
[6114.239] ff
[6115.839] ff
[6119.102] ff
[6121.122] ff
[6121.460] ff
[6121.740] ff
[6122.722] ff

...


This is my MIDI OUT section:

Scanning for MIDI Outputs...
[1] Microsoft GS Wavetable Synth
[2] USB Midi  (*)
MIDI Monitor ready.
[6554.222] f0 00 00 7e 32 00 00 01 f7
[6554.222] f0 00 00 7e 40 00 0d 02 00 00 00 00 00 00 01 00 00 00 00 f7
[6554.429] f0 00 00 7e 40 00 02 00 00 00 01 10 11 12 13 14 15 16 17 18 19 1a f7
[6554.632] f0 00 00 7e 40 00 02 00 00 00 01 10 11 12 13 14 15 16 17 18 19 1a f7
[6554.835] f0 00 00 7e 40 00 02 00 00 00 01 10 11 12 13 14 15 16 17 18 19 1a f7
[6555.038] f0 00 00 7e 40 00 02 00 00 00 01 10 11 12 13 14 15 16 17 18 19 1a f7
[6555.241] f0 00 00 7e 40 00 02 00 00 00 01 10 11 12 13 14 15 16 17 18 19 1a f7

 

I already tried to choose different Device IDs but it doesn't work!

I hope someone can help me, i have no idea how to fix this problem :(

cheers, Leo!

 

 

asd.jpg

Edited by lakewood
Link to comment
Share on other sites

Just now, Shuriken said:

You need to upload the bootloader through midi first before uploading the application.

The problem is that I can't do anything in MIOS Studio, so how do I upload the bootloader?

I still get the message:

No response from MIOS8 or MIOS32 core!
Check MIDI IN/OUT connections
and Device ID!
For debugging see also
Help->MIDI Troubleshooting

Edited by lakewood
Link to comment
Share on other sites

The MIDI-Interface should work fine, i get a signal from the burned PIC and the MIDI IN status LED of my interface is blinking (recieving information). But this information looks like this:

Scanning for MIDI Inputs...
[1] USB Midi
MIDI Monitor ready.
[6104.260] ff
[6104.920] ff
[6106.760] ff
[6109.840] ff
[6111.680] ff
[6112.941] ff
[6114.219] ff
[6114.239] ff
[6115.839] ff
[6119.102] ff
[6121.122] ff
[6121.460] ff
[6121.740] ff
[6122.722] ff

...endless...


i burned the PIC with PICkit 2 v2.61 and there was no error at all... :/

12698854_1115591941798204_1303893134_o.jpg

Edited by lakewood
Link to comment
Share on other sites

Just now, Shuriken said:

Try turning off the Core, select the hex file and press Start in MIOS Studio. Then power on the Core.

 

Reading mios8_v1_9h_pic18f452.hex
Trying to contact the core...
mios8_v1_9h_pic18f452.hex contains 12826 bytes (52 blocks).
Range 0x00000000-0x00002fff (12288 bytes) - MIOS8 area
Range 0x00003000-0x000033ff (1024 bytes) - PIC Flash
Range 0x00007c00-0x00007fff (1024 bytes) - PIC Flash
WARNING: no response from core
Please reboot the core (e.g. turning off/on power)!
Waiting for upload request...


still got no respond from core :/

the only thing that changes is this constant MIDI IN stream:


[10223.823] ff
[10225.221] ff
[10225.222] df 7f   Chn#16  Aftertouch G-8
[10225.222] df 7d   Chn#16  Aftertouch F-8
[10225.222] ff
[10225.223] fd
[10225.862] ff
[10225.905] ff
[10226.061] ff
[10226.881] ff
[10227.116] ff
[10227.720] ff
[10227.919] ff
[10228.341] ff
[10228.978] ff
[10229.619] ff

...
 

Link to comment
Share on other sites

Just now, Shuriken said:

Have you done a voltage check before you plugged in the PIC and 6N138? 

IC5:MCLR(1) - IC5:Vss(12) = 5V
IC5:Vdd(11) - IC5:Vss(12) = 5V
IC5:Vdd(32) - IC5:Vss(31) = 5V
IC9(8) - IC9:(5) = 5V

 

I just checked the voltages, should be fine:

IC5:MCLR(1) - IC5:Vss(12) = 4,98V

IC5:Vdd(11) - IC5:Vss(12) = 4,97V
IC5:Vdd(32) - IC5:Vss(31) = 4,97V
IC9(8) - IC9:(5) = 4,97V

Link to comment
Share on other sites

Just now, latigid on said:

Your MIDI interface is probably not suitable; MIOS has a rigorous loopback test (?) that won't properly upload firmware unless the connections are solid. 

Check here:

http://www.midibox.org/dokuwiki/doku.php?id=midi_interface_blacklist

Okay, that could be the problem! I'll try to get a different MIDI-Interface!
Thanks!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...