Elektruck Posted March 10, 2018 Report Share Posted March 10, 2018 Is there a way to get full acces to the SDCard without removing it. I have some trouble with MIOS Studio and my SeqV4/LPC17 board. Mostly I can't download the HW4 file, and I would like to import MIDI files from Ableton. For now I don't have a MIDI directory and I'm not able to create one. I have an acrylic case and it would be quite hard, maybe impossible, to open it without damage. Quote Link to comment Share on other sites More sharing options...
latigid on Posted March 10, 2018 Report Share Posted March 10, 2018 On the MIOS download page there's hex files for a "mass storage device" that you could try. Looks like these are not yet built for STM32F4? What Core are you using? Quote Link to comment Share on other sites More sharing options...
Elektruck Posted March 10, 2018 Author Report Share Posted March 10, 2018 Yeah, I saw this app and I'm using a LPC17 board, so that would be OK, but as far as I understood, I can't upload the Seq app afterwards. The "read me" says it turns your board into a mass storage device, and that you have to remove the SDCard to disable this function..... Quote Link to comment Share on other sites More sharing options...
latigid on Posted March 10, 2018 Report Share Posted March 10, 2018 I think you would upload the MSD hex, reset, take the files you need, then connect again to MIOS Studio and upload the SEQ hex. Or am I missing something? SD card access isn't required to upload hex files. Best, Andy Quote Link to comment Share on other sites More sharing options...
Elektruck Posted March 10, 2018 Author Report Share Posted March 10, 2018 Ok, now I'm confident enough to try it. I was afraid MIOS Studio wouldn't recognize my board anymore. I'll try and I'll let it know. Quote Link to comment Share on other sites More sharing options...
Elektruck Posted March 10, 2018 Author Report Share Posted March 10, 2018 OK, now my sequencer turned into a mass storage device, and I'm unable to reach it from MIOS Studio:( Good thing: I did understand the "readme" :) Quote Link to comment Share on other sites More sharing options...
Elektruck Posted March 10, 2018 Author Report Share Posted March 10, 2018 Ok, I have my sequencer back. :) Contacting over USB didn't work anymore, but when I attached the sequencer with the midi in/out ports to my GM5 USB MIDI device, MIOS Studio recognized the LPC17, and I was able to upload the SeqApp again. It's a bit of a hassle but at least I'm able to reach the SDCard without dimolishing the casing....Thanx pointing me into this direction Quote Link to comment Share on other sites More sharing options...
flyweight Posted March 21, 2018 Report Share Posted March 21, 2018 Isn't there a file browser in MIOS studio? Quote Link to comment Share on other sites More sharing options...
Elektruck Posted March 22, 2018 Author Report Share Posted March 22, 2018 21 hours ago, flyweight said: Isn't there a file browser in MIOS studio? Yes, there is. But everytime I tried to download/edit the bigger files like MBSeqHW.V4, MIOS Studio seemed to freeze, it couldn't contact the Core anymore. After clicking the update button it contacted again, but I couldn't open the files, again,...so that didn't work for me. After all this hassle I installed the GM5 driver for 64bit windows version, I'm using windows 10 64 bit, and now all seems to work OK. I just checked and I can open all files, download the midi files from my sequencer, etc. So my troubles seems to have vanished. I thought I had installed the right driver before, but re-installing it seemed to do the trick! Quote Link to comment Share on other sites More sharing options...
flyweight Posted March 26, 2018 Report Share Posted March 26, 2018 OK good that you're issue is resolved. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.